Miscellaneous Planer

Delta Power Tools 22-590 Portable Planer Review

If you plan on taking your woodworking to the next level, then you need to ditch the pre-pampered boards from large retailers and mill your own lumber. You can purchase boards from lumber mills at a fraction of the cost – all you need to do is give them a thorough jointing and planing and you’ll be good to go. This, of course, means you’ll need a high-quality thickness planer to get the job done.

Delta Power Tools 22-590 Portable Planer Review

From the seemingly infinite number of thickness planers out there on the market, finding the right one can be a challenge. We pride ourselves in being able to distinguish the good from the bad, which leads to the question: is the Delta Power Tools 22-590 Portable Planer worth the investment?

Motor Power

Thickness planers need to come with powerful motors to dimension all types of wood. The more powerful the motor, the more versatile the thickness planer is since it can be used to shave layers off of soft and hardwoods alike. This DPT tool comes with a hefty 15-amp motor which delivers up to 10,000 RPM. This is the largest motor available in planers while still retaining its portability.

Delta Power Tools 22-590 Portable Planer


The electric motor drives the cutterhead to deliver a high number of cuts per inch. Planer cutterheads can come with either two or three knives, and more knives translate into cleaner finishes. This planer model comes with a 3-knife cutterhead for maximum cutting efficiency – up to 30,000 cuts per minute. However, the board’s isn’t even across the entire surface, requiring more than three passes to get the surface to the desired smoothness. This, unfortunately, means having to remove more material than previously planned.

Feed Rate and Cuts per Inch

The feed rate is the speed at which the planer’s rollers move the board from the infeed table to the outfeed table. This model only has one speed – 26 feet per minute – and the 3-knife cutterhead delivers around 96 cuts per minute. The surprising thing is that these specs match those of higher quality, more expensive planers, but produce considerably worse finishes.

Maximum Board Width and Thickness

As a portable planer, it’s not realistic to expect it to be able to swallow humongous pieces of rough lumber, but rather sizable boards should be able to pass through it without too much pre-dimensioning. The 22-590 can plane boards 6 inches tall and up to 13 inches wide. Nothing too amazing here since this is the average capacity for most portable planers.

Delta Power Tools 22-590 Planer

Infeed-Outfeed Tables Support

The length of the infeed and outfeed tables determines the maximum length of a board that can pass comfortably under the planer’s cutterhead. Longer tables are preferred since they can support longer boards, but it would mean having to detach and reattach them when transporting the unit. This planer’s tables can support boards as long as 10 inches which, when compared to other portable planers, is actually quite short.

Snipe Control

Snipe is the unintended removal of too much material on both the front and tail ends of the board. Even the best portable planers have this problem since the infeed and outfeed rollers do not grasp the board simultaneously as it passes under the cutterhead. After passing numerous boards under this tool, we and many others found that it manages/reduces snipe extremely well. This is actually quite a shock since it requires several passes to produce smooth surfaces.

Depth Gauge

It’s important that you adjust the height of the cutterhead before passing wooden pieces through the planer. If it’s set too far deep into the board, it’ll overwork the motor, dull the knives quicker, and leave deep scratches on your material. The cutting depth can be set to anywhere between 1/8 and 1-1/4 inches deep, though we recommend staying within the 1/8 to ¼-inch range for the best, yet slightly jagged, results. The gauge’s locking mechanism works like a charm to produce repeated cuts across all of your workpieces.

Dust Port

As your boards pass beneath the cutterhead, the knives will quickly remove thin layers of the material, producing copious amounts of dust, chips, and shavings. To help cope with debris, Delta Power Tools has included a 4-inch dust port in this model. Most of the debris will fall in the direction of the dust port where your shop vac or dust extractor can suction it up easily. You’ll still find quite a bit of dust near the base of the planer, but it’s not so much that you’ll curse internally as you sweep it all up.

Delta Power Tools 22-590


As a portable planer, it needs to travel well and not weigh you down as you load and unload it from your vehicle. The 22-590, with its infeed and outfeed tables attached, weighs roughly 76 pounds – not too far off from the industry average. Needless to say, it travels well, and the durable casing is able to withstand bumps along the way.

Problems with the Drive Belt

One problem that numerous customers have complained about (not us though) is that the drive belt and pulley system isn’t perfectly in place straight out of the box. This can lead to burning through the drive belt quicker than normal. Fortunately, replacement drive belts are inexpensive, so if you do end up tearing through the first, you can get a second without spending too much. Furthermore, the misplacement of the pulley and/or drive belt can be fixed quickly by removing two stainless steel screws and wiggling the motor in place.


So after testing out the Delta Power Tools 22-590 Portable Planer for a while, here are our findings. First, there are plenty of better brand-name portable planers out there on the market. Second, this tool reduces snipe to mere millimeters but does a pretty poor job and producing smooth surfaces.

And thirdly, the 10-inch board support makes the 22-590 suitable for smaller projects so it probably won’t deserve a spot in a professional workshop. We were actually quite saddened so many unacceptable faults in this tool since it is produced by a reputable manufacturer.

Overall, this tool would probably work well in smaller woodshops but it’s not something that you would brag to your friends about.

Delta Power Tools 22-590 Portable Planer Review

Miscellaneous Planer

DEWALT vs Bosch: Portable Planer Comparison

Wood planers are super-handy tools to have in the workshop. Without a planer, adjusting the thickness of a board would require you to either sand it by hand, use a handheld power sander, or bring your material to a table sander – all three of which are rather unreliable in producing identical results on multiple boards.

DEWALT vs Bosch: Portable Planer Comparison


Wood planers don’t just come in bench-top models, but there are also handheld wood planers that deserve some attention. Although operating one requires a steady hand, the best models should come with features that improve accuracy and uniform planing every time.

This time around, we’re going to take a look at two popular power tools manufacturers’ portable planers are put them head-to-head: the DEWALT 26677K and the Bosch PL2632K. Both of these handheld portable planers have been praised by their customers. Here, we’re going to focus on their different features and determine which of the two would be the better overall purchase. Let’s get started.

Bosch vs DEWALT: Portable Planer Comparison

Bosch PL2632K

Cutting Speed

DEWALT D26677K and Bosch PL2632K
The speed of the blade determines the finish. The quicker the blades enter and exit the surface of the board, the smoother a finish you’ll get. Both the DEWALT and the Bosch have similar cutting speeds, delivering up to 34,000 cuts per minute. This is a lot quicker than most bench-top models, meaning that using either of these models will produce a super-fine surface that’s ready for further processing.

What Does a Wood Planer Do?


As a handheld power tool, a portable planer should be lightweight, compact, and easy to use. The weight of the unit can indicate how much trouble you’ll have navigating the unit over wood surfaces. The DEWALT weighs in at around 10 pounds. Although it’s not exactly the lightest model you’ll find on the market today, it’s still relatively lightweight and won’t cause cramping in your hand, forearm, or shoulder.

DEWALT vs Bosch


Bosch PL2632K
The Bosch is considerably lighter, weighing in at only 6.3 pounds. The lighter weight means you can operate the machine for longer periods of time with a reduced risk of fatigue in your arm and shoulder. The lighter weight comes from its more compact design which makes the unit easier to store without taking up too much space.

Conclusion: Considering that both of these portable planers feature 15-amp motors, we find it amazing that the Bosch can deliver the same amount of power and speed while weight about 40% less than the DEWALT. Not that the DEWALT is a bad machine because it’s heavier, but the Bosch is even more amazing because it’s lighter.


The number of blades and the material used to construct them can be an indicator of how smooth the end result with be. Generally speaking, the more blades used to shave off fractions of an inch off of the surface of a board, the smoother the finish. The DEWALT uses a dual-blade system where the blades can either be made out of high-speed steel or carbide (both available and sold separately). The carbide steel blade is definitely the better of the two options if your aim is to produce super-smooth surfaces.

Bosch vs DEWALT

Bosch PL2632K

Bosch PL2632K
The Bosch has a dual-blade setup that uses two high-speed steel blades for efficient shaving. High-speed steel isn’t the best quality material for blades, but if you put two of them together, like in this Bosch unit, then you can produce extremely smooth surfaces with fewer passes.

Conclusion: They both use the same number of blades, so one really has no preference over the other. However, when looking at the type of blades that can be used in these portable planers, it’s clear that the DEWALT is the better model simply because it accepts both high-speed steel and carbide blades.

DEWALT Portable Planer


Dust Ejection Port

When using a portable wood planer, you can believe that the unit will shoot out copious amounts of wood shavings and dust. After all, a portable planer is designed to shave off very thin layers off the surface of your wood board. Even though the DEWALT comes with a dust ejection port, you need to purchase dust collection bags separately or connect the unit directly to your DEWALT shop vac or dust collector.

Bosch PL2632K
As for the Bosch, it also comes with a dust ejection port, but the best thing is that upon purchase you get one dust collection bag. You can order replacements online or find them at most large hardware stores.

Conclusion: We acknowledge that both the DEWALT and the Bosch have great dust ejection ports for getting rid of minuscule wood residue, but the fact that the Bosch comes with an actual bag to collect dust, chips, and shavings means you get more for your purchase.

Bosch Portable Planer

Bosch PL2632K

Cutting Depth

Like any planer, the cutting depth of a handheld portable planer can is adjustable. The DEWALT has a maximum cutting depth of 1/16 of an inch. This means that at its maximum setting, you’re still hardly cutting anything off the surface of your material. This ensures accuracy and never surpassing the depth at which you’re aiming for.

Bosch PL2632K
The Bosch can be adjusted to cut at a depth of up to 1/8 of an inch. The deep cutting capacity in combination with its rapid cutting speed, you can work quickly to shave off thicker layers off of the surface of your board.

Conclusion: Getting work done quickly is important for any DIY-hobbyist and professional woodworker. We favor the Bosch’s deeper cutting capacity since it allows users to virtually shave off twice as much off the surface of your wood compared to the DEWALT. The end results will also be similar because of their similar cutting speeds.

DEWALT vs Bosch: Portable Planer Comparison

Check how much you can save, buying the DEWALT D26677K on Amazon >>>

DEWALT vs Bosch: Verdict

Except for the use of carbide blades, the Bosch PL2632K wins in every one of these battles of the specs and features. First of all, in terms of performance, both of these devices work similarly (34,000 CPM). In terms of weight, even though the two models produce the same amount of power and cutting speed, the Bosch is only 6.3 pounds, about 4 pounds lighter than the DEWALT, meaning less arm strength is needed to use and glide this unit on longboards.

Although the Bosch isn’t compatible with carbide blades, a dual high-speed steel blade setup is more than enough to guarantee super-smooth finishes. The Bosch PL2632K also comes with a hand dust collection bag, whereas with the DEWALT you need to purchase the bag separately. Finally, regarding the maximum cutting depth, the Bosch can cut twice as deep as the DEWALT D26677K, meaning you can finish work twice and quick while producing the same smooth results. Our verdict is clear: the Bosch PL2363K the obvious choice between these two popular portable planer models.

Bosch vs DEWALT: Portable Planer Comparison

Check how much you can save, buying the Bosch PL2632K on Amazon >>>

Planer Infographic

Best Wood Planer: Buying Guide