SKIL 6445-04 vs DEWALT D25263K: Hammer Drill Comparison
With so many hammer drill models currently available on the market, it can be confusing to sort out which hammer drill will best fit your requirements and provide you with the best value for your money.
In this article, we are having a look at the SKIL 6445-04 7.0 Amp ½ inch hammer drill and the DeWalt D25263K D-handle SDS rotary hammer drill and comparing their key relevant features side-by-side in order to help you get at a well-rounded consumer decision.
The SKIL 6445-04 is a compact, handy and lightweight hammer drill that doesn’t put much strain on your wrist. Weekend-DIYers with short-term projects will find this tool more than sufficient to meet their needs.
Its 7.0 Amp motor provides the unit with enough power to penetrate most masonry surfaces such as concrete, brick, asphalt, tile, and mortar. It is also equipped with a side-assist handle to allow more control and accuracy. It is adjustable and can be rotated 360-degrees around the front housing collar.
It also has a variable-speed trigger, a motion-reverse switch and a lock-on button for added safety and flexibility.
Meanwhile, the Dewalt D25263K D-handle SDS rotary hammer is made with the professional user in mind. It is powerful, efficient and comes with proprietary “SHOCKS” – active vibration control technology which DeWalt describes as a ‘perform and protect’ feature.
It is powered by a brushless high-performance 8.5 Amp motor which makes it highly-efficient to take on any drilling or chipping operation with ease across a wide range of surfaces. It is also ergonomically designed for overhead drilling applications.
Even though it weighs twice as heavy as the SKIL 6445-04, it is justified with very good reasons as this tool is packed with impressive useful features that take it to a level compared to the bare-tool, budget-conscious SKIL 6445-04. Overall, the Dewalt D25263K has an exceptional power-to-weight ratio which is even more impressive when you consider its additional features, which are not commonly found with other hammer drills in the market.
The Dewalt D25263K also comes with a 360-degree side handle and a depth rod (which is very useful for practical reasons). Its soft rubber-coated grip D-Handle is very effective at providing additional protection and comfort especially when it’s paired with the SHOCKS – active vibration control.
Below is a detailed look at the key defining characteristics of each tool:
Weight and Dimensions
With dimensions of 13.2 x 10 x 3 inches and weighing a measly 5.5 pounds, this drill is the exact definition of ‘compact and lightweight’.
Weighing 12.2 pounds and measuring a hefty 19.2 x 12.8 x 5.3 inches, this drill is not exactly handy although there’s actually a very good reason for all that weight and size as it supports some seriously impressive features.
The SKIL 6445-04 is nimble, compact and lightweight, which makes it ideal for drilling smaller holes and for light-to-medium duty DIY-type jobs. Its light weight minimizes wrist-strain during operation but may be indicative of the fact that it is not actually expected to be used for frequent use.
The Dewalt D25263K is relatively bulky but packs a good power-to-weight ratio and other impressive features. Certain users actually prefer the heavier weight as it feels more stable and underlines its durability. It is more suitable for frequent heavy-duty use even for seasoned craftsmen and professionals.
This is a corded tool drawing on 120 volts AC power supply.
This corded tool draws from a 115V AC electrical supply.
Both are similar corded tools, so you will have the advantage of tapping into a constant power supply compared to other battery-powered models. The downside is that you will not be as mobile, or be able to take the tool with you to a remote work site if necessary. If you want that type of mobility, then hammer drills are probably not what you are looking for.
This unit has a 7.0 Amp motor that delivers up to 290 inch-pounds of torque.
The Dewalt has an 8.5 Amp high-performance motor that delivers up to 3 Joules of impact energy.
The Dewalt D25263K delivers better power between the two and is better suited for frequent, heavy-duty use of professionals. It is worth noting, however, that the SKIL 6445-04 possesses enough power to handle the usual jobs of most DIYers and hobbyists. These two are actually made for different users with different, albeit sometimes overlapping needs and applications.
This tool has an adjustable-speed trigger that allows maximum control of the drilling speed when being used. Its 1/2-in keyed chuck accepts bigger diameter bits for woodworking or cutting applications and works with a wide range of conventional bits. You have the option to choose between the hammer or plain drill mode.
This tool is equipped with a rotating brush that enables full speed and torque utilization, whether in forward or reverse motions. It also has an integral clutch that minimizes the occurrence of abrupt, high-torque responses during operation. Its bigger chuck size accommodates a broader range of available bit sizes for various applications, although it must be noted that this drill only works with SDS+ drill bits. It comes with a hammer, chisel, and plain drill modes.
If you are more comfortable working with keyed-in chucks using conventional bits or if your work only requires a plain drill or hammer options, then you will be perfectly happy with the SKIL 6445-04, especially if you are only working on some occasional DIY projects at home. It is lightweight and has sufficient power, even though it is somewhat limited to a narrower range of applications because of the smaller chuck size.
If you are a professional or a frequent, heavy-duty user, however, the Dewalt D25263K will be a better option. It is more robust and equipped with a rotating brush and integral clutch designed for more difficult applications. It also has a chisel mode which is not available with the SKIL 6445-04. The bigger chuck also provides versatility on a wider range of hole sizes and applications.
The only limitation (if you can call it that), is that you will have to work exclusively with SDS+ drill bits. This technology helps you save time as it quickly locks the SDS+ bits in place on built-in grooves, although you will not have the luxury of using conventional drill bits for this particular tool.
This is a bare-tool unit and comes with only the ½-in chuck key and side-assist handle. Bits are not included.
This tool comes with its own box. Accessories include a rotary hammer, 360-degree side handle and depth rod. Bits are not included.
The SKIL 6445-04 is a no-frills, bare-tool unit that is intended to appeal to budget-conscious DIY weekend-warrior types. The Dewalt D25263K is made with the professional in mind, as it comes with its own case and useful accessories. In both instances, you will have to shell out a little bit more for a set of drill bits.
A lock-on button is provided for additional operator safety, as well as a range of extra motions that you can perform while the tool is in continuous operation.
This tool comes with a wonderful D-handle, which when paired with the Dewalt proprietary “SHOCKS – active vibration control technology” significantly minimizes vibrations at the handle and provides additional protection for the user.
Owing to its no-frills, budget-conscious makeup, the SKIL 6445-04 does not provide many additional features, except for a lock-on button for added safety and flexibility.
The Dewalt D25263K, on the other hand, is loaded with additional useful features built for the heavy-duty user who uses the tool on a prolonged and daily basis. Its ergonomic design also makes it an ideal tool for overhand drilling applications.
SKIL 6445-04 vs DEWALT D25263K: Conclusion
Examining the SKIL 6445-04 hammer drill> and the Dewalt D25263K D-handle SDS rotary hammer side-by-side is not an ‘apple-to-apple’ comparison. Upon closer inspection, they are actually two different tools made for different users with entirely different needs and applications.
Although those applications may sometimes overlap, in the end, it is apparent that the SKIL 6445-04 is made for light-to-medium duty DIY, infrequent, home-project type of applications while the Dewalt D25263K is geared for prolonged, heavy-duty, wider applications mostly for professional use.
Both rotary hammers are effective within their own respective niche and it would be unfair to compare one with the other in their respective segments. Once you have determined your exact needs, then you will be able to make the best personal decision as to which of the two would be your ideal work partner for the long haul.