The Makita XDT14M Impact Driver comes with two batteries, a carrying case, and all the power you need to get your work done efficiently. You have invested quite a lot of time in your jobs in the past, and you will find that this device was made for people who are most interested in doing heavy work where needed. You have needed that kind of power when drilling into other places in the past, and now you have it with this Makita drill.
|ToolPowers is supported by readers. We don't want to annoy you with display ads, but we do include links to products. When you buy with our links, we may earn a commission.|
There are batteries that come with this impact driver, and each one makes it quite simple for you to work in many hidden spots around your home. You may need to climb a very tall ladder to reach something, and you may need to crawl into a basement. The batteries make the drill very portable, and you will carry it anywhere you need to go to do your work.
The Charging Port
The charging port that is included with this impact driver will help you ensure that you are charging the battery every day after a long day of use. You may plug the charger in in any location you like, and you may carry it with you in the carrying case.
This device does not even weigh three pounds, and it will be much easier to carry when you have long distances to go with this drill. Your arms will not get tired when using this drill, and you will feel much better because you have extra energy to perform other tasks in the house or on your job site.
The brushless motor will run much cooler than any other motor you have found, and you will not feel as though the drill is too hot after you have been drilling for hours on end. You often need to put your hand on the drill to steady yourself, and you simply cannot do that if you are using something that is too hot. The brushless motor solves this problem for you.
The One Touch System
You will use the one touch system to ensure that you have all the attachments fixed in place in seconds. You want to change to a new attachment while you are working so that you may do each job correctly, and switching should be effortless. This process is sped up by the chuck that you turn and tighten quickly.
The Metal Construction
The metal construction of the drill helps it hold up over time, and you will feel much better knowing that it can survive a few knocks once you have begun work. You may not have noticed that you have these options because the drills you bought in the past had flimsy plastic bodies. Now, you can use something that you can drop, kick, and use to its fullest without damaging it at all.
The Led Lighting
The LED lights on the device will tell you the state of the battery, and they will tell you if the device is on or off. You may use these drills until they have run out of juice, and you may point the light where you are drilling so that you can see.
This system keeps dust, dirt, and water out of the housing and motor. You may work in extreme conditions with this device, and you will find that it is much easier to manage because it will not break. You may work in harsh conditions with this drills, and it will do all that you need.
You get the drilling power you need from very high torque that is produced the second that you pull the trigger. This drill will rev up to a very high speed to ensure that you have the leverage you need to drill, and you may power in screws that would not have gone in at any other time.
You may change the three settings of this drill will help you use the torque to move quickly, or you may use the torque to move slow and go through something that is very thick. There are many people who need to slow settings in industrial settings, and you may turn up this drill when needed.
Makita XDT14M: Conclusion
The Makita XDT14M Impact Driver will give you two batteries that you need to keep the device going, and you may carry it with you to every one of the places you plan to go. Each accessory ensures that you have the power needed to complete your work.
3 Recommended Impact Drivers
- Increased visibility: Has built in LED with 20 second delay after trigger release
- Ergonomic design: Compact (5.55 inches front to back)and lightweight (2.8 pounds) design fits into tight areas
- One handed bit loading: Has a 1/4 inch hex chuck and accepts 1 inch bit tips. No load speed: 0 2,800
- Ergonomic design: Lightweight tools designed to fit the user’s needs
- Increased Visibility: The DCF885 features a built in Led with 20 second delay after trigger release
- Includes: (1) DCD771 drill/driver, (1) DCF885 1/4 inches impact driver, (2) 20V Max Lithium Ion 1.3 Ah battery...
- BL Brushless motor delivers 1, 500 inches pounds Of max torque
- Variable speed (0 3, 400 RPM & 0 3, 600 IPM) for a wide range of fastening applications
- The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for...