The Makita XDT12M Impact Driver is a fantastic tool that will give you leverage you need when drilling and driving in nails. You may not have known that you needed a device like this until you experienced how powerful it was, and you will feel the difference when you pull it out of the kit. You will get everything driven in in the proper manner, and you will save time on each job.
|ToolPowers is supported by readers. We don't want to annoy you with display ads, but we do include links to products. When you buy with our links, we may earn a commission.|
The Full Kit
The full impact driver kit comes with a carrying case, battery, charger, and the drill itself. You will find that the drill allows you to use the battery for hours, and you may place the battery back in the charger when you are ready. The drill will fit snugly when you are done using it, and you will have only a small amount of weight to carry around. Weighing in at three pounds, this is an easy drill to carry anywhere. Your drill will not take up much space when you toss the impact driver in the back of your truck, and it will slide onto a shelf easily when you are storing it for the weekend.
The battery that is included comes with a gauge that will tell you how long it will last. You will see a basic readout that tells you how much longer you have on the battery, and you will feel much better knowing that you may use the battery so that you are not attached to a cord. There are many people who will reach into tight spaces because the battery helps them get to any part of the room or project, and the battery helps keep the drill balanced as you complete your work.
On Your Belt
You may sling this drill on your belt at any time because it is light and easy to carry. You will save time moving around the job site because this device is so light, and you will feel as though you have made the proper choices for your work when you pull it out, use it, and put it back. There is nothing heavy to lug around.
The Turning Chuck
You may turn the chuck to attach and detach any accessories that you are using. Each of them will fit easily, and you may change them in seconds. The accessories that you receive with the device will fit in the case, and you will have track of them at all times.
You will find it much easier to see when you are working if you are using the LED lights on the impact driver. The device will point straight ahead, and it will show you exactly where you are working. It is much easier to be efficient if you have a light that will guide you wherever you want to go.
The Softest Grips
The rubber grips are very soft, and they will help you rest your hands as you work. You may be very hard on your hands during the day, and it is much easier for you to ensure that you have a good grip when your hand is not in pain. These grip are a bit soft, and you will feel less tension as you squeeze.
The 18V motor will give you all the speed and power that you need because it will rev very high, give you strength to drill through anything, and it will help you anchor screws that are going into the hardest materials.
This device gives you enough leverage to lean into something, drill through it, or attach a screw that would not go through otherwise. You must invest in something that is strong enough to help you complete any job, and you will notice the device change gears if it needs less power. You are no longer in control of your drilling. You may do much of this without thinking about it at all.
Makita XDT12M: Conclusion
The Makita XDT12M Impact Driver will help you harness all the power that you need along with an easy way to change from one tool to the next. You will find that you may drill through anything, and you will notice how much simpler it is for the drill to go through hard sections of wood that you have not been able to crack with anything else. This drill will have more than enough power for any job, accept your accessories, give you long battery life, and keep your arms relaxed.
3 Recommended Impact Drivers
- Increased visibility: Has built in LED with 20 second delay after trigger release
- Ergonomic design: Compact (5.55 inches front to back)and lightweight (2.8 pounds) design fits into tight areas
- One handed bit loading: Has a 1/4 inch hex chuck and accepts 1 inch bit tips. No load speed: 0 2,800
- Ergonomic design: Lightweight tools designed to fit the user’s needs
- Increased Visibility: The DCF885 features a built in Led with 20 second delay after trigger release
- Includes: (1) DCD771 drill/driver, (1) DCF885 1/4 inches impact driver, (2) 20V Max Lithium Ion 1.3 Ah battery...
- BL Brushless motor delivers 1, 500 inches pounds Of max torque
- Variable speed (0 3, 400 RPM & 0 3, 600 IPM) for a wide range of fastening applications
- The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for...