DEWALT DW745 10-Inch Compact Job-Site Table Saw Review
According to many, a table saw is the heart of any woodshop. It does anything a circular saw, and miter saw can do and offers a ton of support for handling large pieces of lumber. Table saws can be portable, allowing you to take them from place to place while still providing ample power for cutting through thick boards.
The DW745 from DeWalt is one of these table saws that is compact enough to transport without a hitch. However, apart from being portable, what other features make this tool worthy of purchasing? In this article, we’re going to take a close look at the DW745 to find out whether it’s as good as numerous customers say it is.
Weight and Portability
Since the biggest selling point of the DW745 is its portability, we’d like to find out just how portable it really is. The weight of the DW745, fully assembled but not including the stand (sold separately), is roughly 55 pounds which, by table standards, is rightfully classified as lightweight. Loading and unloading the DW745 does not require helping hand, and it’s compact enough to not take too much space in the bed of a truck.
The DW745 comes with a large 15-amp motor that provides extreme effectiveness and efficiency in cutting through thick lumber. The tool is fitted with a 10-inch 24-tooth carbide blade that spins at a maximum speed of 3,850 RPM, giving you nice, clean cuts on the edges of your work. The motor generates enough torque to saw through sopping wet to frozen stiff boards when working in the field.
The DW745’s 10-inch carbide blade has the ability to cut boards up to 3-1/8 inches thick in a single pass. The blade can bevel up to 45° and cut at depths of up to 2-1/4 inches. For an on-site table saw, we found that these cutting depths are just about the industry average, so it’s not exactly jaw-droppingly amazing, but you can still get a ton of work with minimal passes over the saw blade.
At first glance, you can tell that the worktable on the DW745 is huge. In fact, it can support rip-cuts through boards as wide as 20 inches. For a portable table saw, this is a tremendous amount of space and support, especially if you’re ripping huge boards down to a more manageable size.
Lackluster Dust Collection System
Now, the one area where the DW745 doesn’t fare so well is the dust management. Anyone who’s ever used a table saw knows just how much sawdust this tool produces, portable or not. Even though the DW745 comes with a 2-1/2 dust collection port, it won’t be of much use out in the field or in any spot away from a shop vac. Furthermore, more often than not, dust falls away from the blade and on the ground, making the dust port somewhat irrelevant.
Not Fit for Dado Blades
You may be wondering why we bothered to mention the DW745’s lack of support for dado blades, stacked sets or wobbly ones. However, it’s an important thing to address if you plan on using this table saw to make joints and grooves. There are ways to get around using dado sets to cut grooves along the length of a board, which this tool can do, but it can be dangerous if you don’t pay attention the safety warnings before doing so.
Great Guarding System
The guarding system that comes in place in the DW745 is pretty decent. Firstly, all adjustments can be made without the use of external tools. Next, the table is anti-friction to allow the smooth movement of passing boards.
However, one thing buyers should be aware of is the plastic top plate which may not seem like a big deal, but the material used to make the top plate is quite crucial to the overall durability of the tool. As time goes on, plastic components are more prone to warping, especially when exposed to the elements of nature which is likely to happen to portable table saws. With proper care and storage, you can significantly reduce the extent of damage to the plastic top plate, but we would have much preferred if it were made of metal.
We hope the plastic top plate didn’t send you running in the opposite direction of the DeWalt DW745 since it is, in our opinion, a fine portable table saw. The powerful 15-amp motor paired with the large 10-inch carbide blade makes it a great tool to have to cut huge boards down to length and width. Keep in mind that the only safe way to use this tool out in the open is if you purchase any compatible saw stand.