No workshop or do-it-yourselfer’s garage is complete with a compound miter saw. However, when it comes to quality, miter saw models fall across the spectrum. The selection process involved in buying one of these versatile cutting tools can be painful when there are many aspects to consider, such as a slide or no slide, blade size, single bevel or dual bevel, dust collection system and motor amps.
From shelves to crown molding, one of the 12 best compound miter saws we’ve compiled will be a great fit for that project you’re starting next week and the projects you’ll do years to come.
This website is supported by readers. As an Amazon Associate we earn from qualifying purchases.
Our Recommended Compound Miter Saws in 2023
12) Black+Decker M1850BD 7-1/4″ Compound Miter Saw
If you’ve never used a miter saw, this type of power tool probably looks intimidating. Whether you are on a budget, consider yourself an entry-level woodworker or simply want an ultra-portable miter saw for crafts and molding, the Black+Decker M1850BD 7-1/4″ Compound Miter Saw is right up your alley.
Since the super-lightweight compound miter saw is made of die-cast aluminum, it only weighs 17 pounds, allowing you to carry it without straining or struggling. Plus, its dimensions measure at 15.75 by 15.25 by 17.5, so the power tool doesn’t take up a ton of space.
Unlike the more heavy-duty 15-amp miter saws, this compound miter saw has a 9-amp motor. However, don’t be deterred by the difference in amperage. Black + Decker implemented ball-bearing technology into the motor’s design to significantly reduce the level of friction.
Therefore, you get a compound miter saw that can rotate the blade at 5,000 rounds per minute to increase your productivity and create thorough, clean cuts.
To get you started, this compound miter saw comes equipped with a 7 and 1/4-inch blade. The 24-tooth blade is suitable for wood pieces such as baseboards, crown molding and picture frames. In terms of cutting capacity, you can power through a 2 by 4-inch workpiece at 90 degrees and a 2 by 3-inch board at 45 degrees.
In order to replace and properly tension the carbide blade, Black + Decker included a handy wrench that fits a 7 and 1/4-inch blade with a 5/8-inch arbor. It also comes with a metal-collared dust bag that secures to the exhaust port and zips up to effectively hold sawdust.
With the M1850BD, you can tilt the blade to a bevel angle of 45 degrees, and it has a miter range of 45 degrees to the right and left. On the miter scale, there are nine positive stops at angles of 0, 15, 22.5, 31.6 and 45 degrees in order to help you quickly make common cuts.
No matter what type of project you’re working on, you get 2 years of home-use warranty coverage from Black + Decker that addresses any issues that may arise.
- Compact, portable saw for cutting accuracy
- Idea for Crown and base molding jobs
- Use for trim, framing and craft projects
Last update on 2023-03-22 / Affiliate links / Images from Amazon Product Advertising API
11) DEWALT DW716XPS Compound Miter Saw
The first DEWALT on our list earns its spot at number 11 in part for its numerous bevel and miter stops and XPS crosscutting guide. The DEWALT DW716XPS Compound Miter Saw also has a 15-amp motor that spins the 12-inch carbide-tipped blade at a respectable rate of 3,600 rounds per minute.
Nested inside a louvered case, this 60-tooth blade has plenty of power behind it to cut through dry and wet lumber. Since it is a DEWALT, it comes with the manufacturer’s 3-year limited warranty and an entire year’s worth of free repair service. If that isn’t enough coverage for you, DEWALT also includes a 90-day satisfaction guarantee.
What keeps this compound miter saw out of the basic category is its XPS Cross Cut Positioning System. The above-blade mounted LED light creates a shadow of the blade to give you the precision of a guided laser without the need to align it.
To operate this shadow producer, simply flip the on/off switch. Because the motor generates power to it, the XPS guide doesn’t require batteries. Unlike a laser, the shadow is clearly visible indoors as well as outdoors.
At 44 pounds, the compound miter is light enough to be portable yet heavy enough to stay in place while cutting. This miter saw also has a carrying handle built into the tool to help you tote it from one work area to another.
As a safety measure, the top handle features an interlocking trigger, which prevents you from accidentally powering the miter saw. Plus, you get a zippered dust bag to reduce sawdust from piling up in your garage or shed.
For beveling and mitering, the DW716XPS offers a quick-adjusting bevel scale and windowed miter pointer, both of which are easy to view. You can bevel left to right within a 0 to 48-degree range, and you get seven stops for your convenience.
The miter capacity goes up to 50 degrees, and the stainless-steel detent plate provides 11 positive stops while the miter control knob lets you override the detent trigger to make cuts outside these stops. This double-bevel miter saw also gives you a 45-degree cutting capacity of 2 by 8 inches and a 90-degree capacity of 2 by 10 inches.
- Integrated XPS cross-cut positioning system of the 12-inch miter saw blade provides adjustment free cut-line...
- Powerful 15 amp, 3,800 rpm motor delivers extended power and durability for the mitre saw
- Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting...
Last update on 2023-03-22 / Affiliate links / Images from Amazon Product Advertising API
10) Hitachi C12RSH2 15-Amp 12-Inch Dual Bevel Sliding Compound Miter Saw
With all the efficient features on the Hitachi C12RSH2 Sliding Compound Miter Saw, this power tool is a must-have for any finish carpenter. It’s equipped with a dynamic sliding fixed-rail system that moves in two stages and maintains the saw’s placement during a cut.
Therefore, you don’t need any extra space behind the miter saw, which is great if you’re working in a crowded area or indoors. The soft-grip vertical handle is made of rubber, which offers additional control. Since it weighs 59 pounds, you don’t have to worry about the miter saw’s base moving as you cut.
The 15-amp motor is operated by a poly-v belt drive, which is capable of slicing through thick, hard wood. In comparison to a direct-drive system, a belt drive has more torque, allowing it to handle heavy-duty jobs. Plus, less dust accumulates in a belt-driven motor, so the motor lasts longer than those controlled by a direct-drive system.
Regardless of whether you’re a novice user or seasoned woodworker, the laser maker with a knob adjuster enhances the accuracy of your cuts. It boasts a crosscutting capacity of 4 and 3/16 inches by 12 and 1/4 inches, and it miters 57 degrees to the right and 45 degrees to the left.
This miter saw also has a two-directional 45-degree bevel-angle ability, so you can flip the blade instead of the workpiece. For fine-tuning a cut, you can turn the rear knob to change the bevel angle. Plus, there are easy-to-read positive stops at 0 degrees, 15 degrees, 22.5 degrees, 45 degrees and the standard crown molding angle of 31.6 degrees.
Using the 17-millimeter wrench that Hitachi included with the miter saw, you can change and tension the 60-tooth, 12-inch blade. The convenient sliding fence rises to 5 and 1/8 inches, allowing it to cut 7.5-inch molding.
When you are cutting grooves or rabbets into a board, you will enjoy using the adjustable depth stop feature, and you will also get plenty of use out of the dust bag. This dual-bevel sliding compound miter saw comes with a 2-year limited warranty from Hitachi, but you will most likely never need it considering how well this miter saw is built.
- Compact slide system with large cutting capacity
- Sliding sub-fence
- Laser marker
Last update on 2023-03-21 / Affiliate links / Images from Amazon Product Advertising API
9) DEWALT DWS779 12″ Sliding Compound Miter Saw
Efficient and versatile – That’s the DEWALT DWS779 12″ Sliding Compound Miter Saw. If you want a general-purpose miter saw from a quality brand that knows how to make long-lasting products, this is the right tool for you.
Although this 67-pound miter saw is not a lift-and-go power tool, its weightiness means that there is little risk of it sliding out of place while you cut. There are a few assembly steps to complete; however, the miter saw comes calibrated, so your cuts will always be accurate.
With all the loud power tools out there, the smooth, quiet 15-amp motor on the DEWALT DWS779 is a pleasant surprise. Its reliable direct-drive motor spins the 12-inch carbide-tipped blade at a rate of 3,800 rounds per minute. The 32 teeth on the stock blade make it ideal for standard carpentry projects.
This dual-bevel sliding compound miter saw is equipped with an automatic electric brake that is an indispensable safety feature. This electric brake can stop the blade in less than 5 seconds after you release the trigger.
The power tool miters 50 degrees to the left and 60 degrees to the right. Its detent plate has 10 positive stops to make each repeat cut match the next.
However, you aren’t limited to the detents thanks to the miter saw’s detent override feature. Additionally, the sliding compound miter saw has a depth stop for cutting grooves. To make sure you adjust the bevel angle correctly, the tool’s scale is large. With the wide miter range, you get a 2 by 16-inch and 2 by 12-inch cut capacity at 90 degrees and 45 degrees, respectively.
Sawdust – It’s the bane of every woodworker’s existence. With this sliding miter saw, the zippered dust bag catches 75 percent of sawdust, so you can have a cleaner workspace. You also get a tall fence and dual horizontal rails constructed from steel for ultimate control and stability.
This sliding fence can support 7.5-inch crown molding and 6.75-inch nested and base molding at a vertical placement. This miter saw is definitely built to last, but its 3-year limited warranty has you covered in case you need it repaired.
- Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops
- The mitre saw has a precise miter system and machined base fence support
- Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick...
Last update on 2023-03-21 / Affiliate links / Images from Amazon Product Advertising API
8) Makita LS1040 10-Inch Compound Miter Saw
Sometimes, simple tools are the most reliable, which is true for the Makita LS1040 10-Inch Compound Miter Saw. This no-frills, get-the-job-done power tool weighs a mere 27.3 pounds, making it easy to transport. Measuring 21 by 18 by 15 inches, it’s a compact miter saw, which is great if you don’t have a lot of space in your garage.
It comes with some basic accessories like a dust bag to reduce sawdust buildup at your work site, a vertical vice to keep your working material in place and a handy triangular rule that you can use for squaring blades.
Controlled by a direct-drive motor, the miter saw puts out 15 amps of power. This motor turns the 10-inch carbide blade at a fast rate of 4,600 rounds per minute and always maintains a constant speed. With its 40 teeth, the blade works well for projects such as building decks, framing, sizing floors and cabinetry.
If you need a higher tooth-count blade for woodworking that requires finesse, the shaft lock lets you change the blade without any hassle. Regardless of the project, you will get a lot of use out of the independent fluorescent light when you need to light up the immediate work area.
You will enjoy having plenty of cutting capability with a miter range of 45 degrees to the left and 52 degrees to the right. The power tool has a pivoting fence that can handle a large workpiece as well as an aluminum base to ensure accuracy. At a 90-degree angle, the maximum cutting capacity is 2 and 3/4 inches by 5 and 1/8 inches.
At a 45-degree angle, the cutting capacity is 1 and 3/8 inches by 3 and 5/8 inches. You can also utilize the nine positive stops to make an easy job out of repeat cuts. The dual-post arm bevel cuts 45 degrees to the left, and it pivots to let you lock in the angle you want. A 1-year warranty and 30-day guarantee give you the coverage you need to protect all this usability and performance.
- Powerful 15 AMP direct drive motor for improved performance; 4,600 RPM
- Dual post compound pivoting arm
- Miter cuts 0°-45° left and 0°-52° right
Last update on 2023-03-22 / Affiliate links / Images from Amazon Product Advertising API
7) DEWALT DWS709 Slide Compound Miter Saw, 12-Inch
DEWALT tools are typically a happy medium between handyman quality and professional grade, and the DEWALT DWS709 Slide Compound Miter Saw (12-Inch) is no exception. This dual-bevel miter saw is a great value if you need it for light-duty or heavy-duty projects.
At a hefty 51 pounds, it offers the stability you need for cutting thick boards, making it ideal for framing jobs. While it comes with a 32-tooth blade, you can easily swap it out with a higher tooth-count blade to cut plastic or aluminum thanks to its on-board blade wrench.
With 15 amps of power moving the 12-inch carbide-tipped blade at 3,800 rounds per minute, you can expect the miter saw to make clean cuts. With its 13 positive stops and the ability to micro-adjust the stainless-steel detent plate, your productivity level is sure to increase.
You’ll be pleased with the wide width of 9.5 inches on crosscuts and the uncommon yet necessary 35.3 miter angle stop for crown molding projects. You also get plenty of maneuverability since it miters 50 degrees to the left and 60 degrees to the right.
Squinting and misreading will never happen because this DEWALT miter saw is equipped with a big red pointer that lets you locate and view miter angles with ease. The unique back fence moves effortlessly, so you can make bevel cuts to a 2 by 10-inch capacity.
Whether you are working on an entire home renovation or simply cutting wide planks to build a deck, the lock knob and 49-degree bevel range give you the stability and flexibility you need to make it look like a professional did it.
The linear ball bearings on the horizontal dual steel rails ensure accuracy and fluid forward and backward motions. Plus, the rigid aluminum base and workpiece clamp add to the sliding miter saw’s stability. Like most miter saws, this DEWALT model comes with a bag for dust collection.
To prolong the tool’s life, the stainless-steel detent plate contains pads to cut down on wear and tear. Should you need to repair this dual-bevel miter saw, DEWALT offers a 3-year warranty and a 1-year service contract at no cost to you.
No products found.
6) Hitachi C10FCE2 15-Amp 10-inch Single Bevel Compound Miter Saw
If you are new to the world of do-it-yourself projects and need to build a tool collection, the Hitachi C10FCE2 15-Amp 10-inch Single Bevel Compound Miter Saw is a great starter miter saw. With this single-bevel compound miter saw, you can easily cut plywood, aluminum sashes, fiberboard and decorative panels.
Since it only weighs 26.3 pounds, you won’t have any problems carrying it to the kitchen, garage or wherever your main work site will be. To make sure you are completely satisfied, the warranty on this miter saw lasts for 5 years.
This compound miter saw features a standard 10-inch blade with 24 teeth, which is well-suited for trim work and framing. Its 15-amp motor turns the blade at a rate of 5,000 rounds per minute, giving you a smooth cut every time, and the motor’s soft start offers stability and safety. If you need to use a different type of blade, you can change it with the 10-millimeter wrench that comes with the C10FCE2.
Since motor brushes wear out with time, the way that Hitachi designed this miter saw allows you to easily access the carbon brush that sends power to the motor’s commutator, so you can be up and running again in just a few minutes.
You get a flexible range of miter angles and precise crosscuts when using this compound miter saw. For miter angles left and right, the degrees range from 0 to 52. With the thumb-controlled miter adjustment system, you can cut along five positive stops to quickly reproduce cuts at common angles. Plus, the bevel moves to the left to 45 degrees.
As you line up your cut, the rubber grip on the horizontal handle offers excellent control and vibration reduction. For further stability, the pivoting flip fence extends, rises 4 inches and has an integrated clamp, saving you the trouble of making manual adjustments.
If you are working on a project that requires a lot of bevel cuts, you’ll appreciate this feature. To keep your working area as clean as possible, this Hitachi compound miter saw is equipped with a dust bag attachment and a chip deflector.
- Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
Last update on 2023-03-21 / Affiliate links / Images from Amazon Product Advertising API
5) Delta Homecraft H26-260L 10-Inch Compound Miter Saw by Delta Power Tools
Weighing only 25 pounds, the Homecraft H26-260L 10-Inch Compound Miter Saw is ultra-lightweight. Therefore, this compound miter saw is the perfect fit for multiple-room home projects or contractors who hop from site to site on a regular basis.
Even better, Delta designed it to conform to almost any miter-saw stand. All you need to secure the miter saw to the table of your choice are some lock washers, hex bolts and machine bolts that are three-eighths of an inch in diameter.
Although some assembly is required out of the box, there are only five pieces, so it should only take you a few minutes to put it together. The 10-inch carbide blade on this miter saw is held in place by a spindle lock, which you can easily loosen and remove to change the blade. Delta outfitted this Homecraft miter saw with a 14-amp motor.
While the majority of miter saws are equipped with a 15-amp motor, you won’t notice the 1-amp difference because this compound miter saw has an outstanding blade-spinning rate of 5,500 rounds per minute, which is faster than some of the 15-amp miter saws on the market.
The miter saw has a single-pass crosscutting capacity of 4 by 4 inches at 90 degrees and 2 by 6 inches at 45 degrees. The detent plates have five quick-positioning stops at 0 degrees, 15 degrees, 22.5 degrees, 30 degrees and 45 degrees. In regard to bevel cuts, this compound miter saw can go to 47 degrees with a 45-degree rotation in both directions.
It also has a fixed fence to facilitate accurate cuts and provide steady support along with an ergonomic handle to give you stability. The horizontal hold-down clamp acts as a third hand to keep your material from moving while you make a cut, and there is a standard dust bag to collect sawdust.
Unlike some budget-friendly miter saws, the Homecraft H26-260L comes with a battery-operated laser that has defined edges for clear visibility. All this cutting power is backed by a generous 5-year warranty, helping you to protect your investment.
- Lightweight unit is easy to move from room to room or even from job to job.
- Works with virtually all miter saw stands
- Spindle lock hold spindle securely while blade nut is loosened and removed
Last update on 2023-03-22 / Affiliate links / Images from Amazon Product Advertising API
4) Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw
It doesn’t take long for a garage or workshop to get crowded with tools, discarded workpieces and projects at various stages of completion. While the 65-pound Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw is a heavyweight, its axial-glide system makes the miter saw an innovative space saver.
Using the 60-tooth blade, the articulated arm is able to make wide crosscuts that are more precise than miter saws with a sliding-rail system. With the axial glide, you get enhanced bevel-angle control and no-falter alignment along with a damper to adjust the gliding movement.
Since this smooth-cutting miter saw does not require much rear clearance, it is a fantastic power tool to use on job sites. To change the 12-inch blade, use the convenient blade wrench that Bosch included with the miter saw.
The user-friendly features don’t end with the axial-glide system. Bosch also made it easy for you to read the scales. Designed with high visibility in mind, you can align the etched steel miter scale to one of the 10 miter detents that range from 0 to 52 degrees to the left and 0 to 60 degrees to the right.
This visibility carries over to the adjustable left and right bevel angles with positive stops at degrees of 0, 33.9, 45 and 47.
This compound miter saw even has a clear low guard, so your line of sight isn’t obscured. You will get a lot of use out of the bevel-lock lever and range selector, both of which are conveniently located at the front of the saw. These upfront controls eliminate the hassle of reaching behind the miter saw to perform adjustments.
Another mark in this compound miter saw’s favor is its large cutting capacity with limits at 14 inches horizontally, 6.5 inches vertically and 6.5 inches for crown molding cuts against the fence. All the aforementioned features are powered by a 15-amp motor and 3,800 rounds per minute of spinning action.
For greater precision, Bosh implemented its Squarelock quick-release fence system. Pre-aligned at 90 degrees, this fence system features a one-touch locking mechanism that lets you slide both supports into position, giving you 40 inches of length. You also get an efficient dust collection setup that includes a dust bag and elbow chute that doesn’t require an adapter to attach a standard-size vacuum hose. When estimated, the dust collection system contains 90% of the sawdust the tool generates. With this double-bevel miter saw, you get warranty coverage for 1 year in addition to a 30-day satisfaction guarantee.
- AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being...
- CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against...
- ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter...
Last update on 2023-03-21 / Affiliate links / Images from Amazon Product Advertising API
3) DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw
With the DEWALT DWS780 Double-Bevel Sliding Compound Miter Saw, you get a reliable double-bevel sliding compound miter saw with some enhanced features.
If you are in the market for a compound miter saw that is tough enough for tasks like framing and precise enough for projects such as furniture making, the DWS780 is the compound miter saw for you. This power tool is backed by a 90-day guarantee and a 3-year warranty. Plus, you get 1 year’s worth of service for free. Of course, this excellent warranty protection is what you’d expect from a brand like DEWALT.
The textured trigger handle is designed to help you transport the 54-pound miter saw without struggling or losing your grip. To prevent the power cord from getting in the way of the sliding mechanism, DEWALT decided to route the cord through the back of the tool. Plus, there is a specially designed collection bag that is able to catch approximately 78 percent of the dust created from your woodworking projects.
There is no puny amperage here. This DEWALT miter saw boasts a 15-amp motor that spins the blade at respectable 3,800 rounds per minute. This impressive power tool has the ability to make a 90-degree crosscut on a workpiece as large as 2 by 4 inches.
You get a 0 to 60-degree left-hand range and 0 to 50-degree right-hand range for miter cuts, and the stainless-steel detent plate has 10 positive stops to quickly make the cuts you need. However, you can also use the detent override function to get the perfect angle for your particular project.
In order to keep your material secure, the DWS780 is equipped with a vertical clamp and fence support. With this compound miter saw, you can bevel cut 48 degrees to the right and left, and each direction has five bevel crown stops. Thanks to DEWALT’s innovative XPS work light, you don’t have to worry about messy, inaccurate cuts.
Unlike built-in lasers that must be calibrated and have a fixed line width, the XPS system throws a shadow onto your workpiece. The closer you bring the blade to the material, the sharper the shadow becomes until it almost matches the blade’s kerf; therefore, you get precision cutting without having to make any adjustments.
- Integrated CUTLINE Blade Positioning System provides adjustment free cut line indication for better accuracy...
- XPS technology uses an LED to project light down either side of the blade, creating a shadow on the cutline...
- Super-efficient dust collection system of DEWALT miter saw captures over 75% of dust generated
Last update on 2023-03-21 / Affiliate links / Images from Amazon Product Advertising API
2) Evolution Power Tools RAGE3 Multipurpose Sliding Miter Saw
It’s all about versatility with the Evolution Power Tools RAGE3 Multipurpose Sliding Miter Saw. With just one blade, the sliding miter saw can cut through aluminum, plastic, low-carbon steel and nail-riddled wood.
It features all the facets of a compound miter saw along with a forward-and-backward sliding arm that can handle wide, thick material. The 10-inch tungsten carbide-tipped blade has 28 teeth, making it a great multipurpose blade that you can utilize to create a workable finish. Inside the miter saw, there is a high-torque gearbox, which is designed to make the power tool a durable, sharp performer.
The sliding miter saw doesn’t generate many sparks or make rough edges. On the exterior, the shell can withstand frequent use and metallic workpieces. Additionally, the 15-amp motor and 2,750 rounds per minute ramp up the miter saw slowly while still giving you a lot of power.
With the RAGE3, the tilt-and-slide arm moves smoothly and makes excellent long-angled cuts. It is able to cut across wood grain at a capacity of 11.75 by 3 inches and slice through mild steel as thick as one-quarter of an inch.
For trenching and grooving, you can adjust the depth of the cut to almost 12 inches for 90-degree cuts and 8.25 inches for 45-degree cuts.
At 90 degrees, you can bevel cut up to 3 inches. At 45 degrees, the bevel-cut maximum is 1.5 inches. The only positive stop on the sliding miter saw is at 45 degrees.
On the 39-pound RAGE3, there are several features for your convenience and safety. First, it has a laser guide that you can calibrate to help you make accurate cuts. It also comes with a vertical clamp for securing your working material and a chip deflector to keep wood slivers and cut-off pieces from flying in your face.
There is even a pivoting blade guard that moves as you cut as well as a dust bag and chute plug for dust and debris mitigation. This medium-duty sliding compound miter saw is covered by a 3-year warranty from Evolution Power Tools.
- MULTIPURPOSE CUTTING: Patented multipurpose cutting technology allows you to make compound miter cuts in mild...
- MINIMAL SPARKS, BURRS & HEAT: Cut through 6mm mild steel with no heat, no burrs & virtually no sparks, leaving...
- SIMPLE & ACCURATE MITER CUTTING: Features a 45 degree L&R miter system with 9 positive stops. A 0-45 degree...
Last update on 2023-03-22 / Affiliate links / Images from Amazon Product Advertising API
1) DEWALT DW715 Single-Bevel Compound Miter Saw
The DEWALT DW715 Single-Bevel Compound Miter Saw is an excellent buy if you’re simply looking for a sturdy miter saw to use for at-home projects. For a 12-inch compound miter saw, it’s surprisingly lightweight at 42 pounds. The thin, sharp carbide blade with 32 teeth is suitable for basic woodworking tasks that require accurate, clean cuts. You will appreciate the stability with each slice thanks to this compound miter saw’s side handles with a comfortable grip and lack of play in the saw arm.
With this single-bevel compound miter saw, you get a 2 by 4-inch crosscut capacity. It can bevel cut 48 degrees to the left and 3 degrees to the right, and it offers four common-angle bevel stops.
You also have the ability to lock the table after you adjust the miter handle by using the cam lock. Plus, it comes with a blade wrench to eliminate the hassle of finding the correct tension.
For precision cutting, the miter detent override feature comes in handy, letting you adjust the miter angle as you see fit. Otherwise, you have 11 positive stops to work with on the stainless-steel detent plate, which is accurate enough to easily reproduce cuts.
As far as the sliding fence goes, this one is tall, and it can support 5.25-inch crown molding as well as provide 6.5 inches of vertical bracing for base and nested molding. If you need more support, the DEWALT DW715 comes with an extension kit.
This portable compound miter saw has a carrying handle built into it, so you can take it from the garage to the driveway without help. Thanks to its 15-amp motor, you have plenty of power to cut through thick boards. In addition, it rotates at 4,000 rounds per minute, which means you’ll get a lot of use out of the blade before you need to change it.
Like many miter saws, its dust collection system consists of a dust bag to cut down on the amount of sawdust you have to clean up with a shop vac. For your peace of mind, the DEWALT DW715 comes with a 90-day satisfaction guarantee, a 1-year contract for free service repairs and a 3-year limited warranty.
- 15 amp motor, 4,000 rpm delivers extended power and durability for the 12-inch miter saw blade
- Adjustable stainless steel miter detent plate with 11 positive stops of the mitre saw improves productivity...
- Precise miter system and machined-base fence support optimize cutting accuracy for DEWALT miter saw
Last update on 2023-03-22 / Affiliate links / Images from Amazon Product Advertising API
This website is supported by readers. As an Amazon Associate we earn from qualifying purchases.
We appreciate your feedback. Please add them below in the comment section.