- 9 Best Bench Top Jointers: Tools for Carpenter and Woodworkers
- What is a Jointer?
- What does a Jointer do?
- 9) Cutech 40180HC-CT 8″ Bench Top Spiral Cutterhead Jointer
- 8) Steelex ST1010 Jointer with Mobile Base
- 7) JET 708457DXK JJ-6CSDX 6-Inch 1 HP Jointer
- 6) Shop Fox W1829 Benchtop Jointer, 6-Inch
- 5) Jet JJP-10BTOS 10-Inch Bench-Top Jointer/Planer
- 4) Cutech 40180H-CT 8″ Bench Top Spiral Cutterhead Jointer
- 3) PORTER-CABLE PC160JT Variable Speed Bench Jointer, 6-Inch
- 2) Delta Power Tools 37-071 6 Inch MIDI-Bench Jointer
- 1) Cutech 40160H-CT 6″ Bench Top Spiral Cutterhead Jointer
9 Best Bench Top Jointers: Tools for Carpenter and Woodworkers
When you purchase rough lumber for woodworking projects, you will occasionally get a board that has a bow or a twist in it. And to be able to work on the machines, like the table saw, you need to have the faces flat and the edges square. Thus, one of the first machines you are going to have to use to solve that bow in the face of the wood, is a jointer.
What is a Jointer?
A jointer is a cylindrical set of blades, that are down in the bed of this unit. The way that the unit works, in the most basic way, is that you are starting on an infeed table that is slightly lower than the blades and the outfeed table. The blades and the outfeed table are at the same height.
So it is basically going into a little cliff of blades that shave off a small amount, and then you end up at the new height, on the outfeed table. For more information on the jointer, please watch the following video.
What does a Jointer do?
9) Cutech 40180HC-CT 8″ Bench Top Spiral Cutterhead Jointer
If you’re eager to try making a couple of small benchtops from hardwood stock like maple, then this Cutech 40180HC-CT 8″ Bench Top Spiral Cutterhead Jointer is the tool you need to do a quick job of straightening the edges.
In addition, some hardwood varieties – even after being planed – aren’t quite as flat. Quick work with this jointer should give you a lateral face that can rival a planer bed for thickness milling. Also, this unit is suitable for the beginner woodworker or someone looking for a modestly priced jointer. If this sounds like the type of jointer you are looking for, read on.
This Cutech jointer has an 8-inch spiral blade with 12 carbide inserts. The replacement inserts are available in packs of 10. Should a single insert be chipped or nicked, rotating, it will reveal a fresh cutting edge. If the same blade wears, you can also replace just that single insert.
You can find the carbide inserts just about anywhere as well as from the manufacturer. Weighing at 49 lbs and measuring 33-1/2 inches by 19-1/4 inches by 12-3/4 inches, this unit will not take up much room in your workshop or garage; it is also easy to transport. This jointer features a cutterhead guard with a tension return spring, which is set at the factory and automatically returns to the fence after a piece has gone over the cutterhead.
There is also a dust port, which you attach to the jointer and may connect it to a standard 4-inch vacuum hose. The switch assembly on this 40180HC-CT features a switch that you flip up and down to turn the unit on or off; this assembly is also fitted with a unique lockout toggle that helps prevent unauthorized use of your jointer.
This Cutech 40180HC-CT Bench Top Jointer unit is for users looking for a modestly priced spiral cutterhead jointer that will get the job done – this applies to the beginners as well. It is also the perfect solution if you are ok working with only 8 inches of cutting width and a table to table measurement length of about 2.5 feet.
If you’ve been looking for a jointer machine that does not take up too much space and easy to move, this is the solution. However, you should note that this jointer features an aluminum fence, which is not the strongest of materials out there for the most precise cuts.
8) Steelex ST1010 Jointer with Mobile Base
If you run a woodworking shop in your garage, it is likely that you will need a jointer. A wood jointer helps take care of all the ragged and curved wood pieces, giving them a flat and straight edge or surface. Once one side of your wood is done, you can run it through the planer to get the other side smooth too.
Ok, you can buy larger, more expensive jointers, but a unit that offers you the capability to face-joint 6-inch stock will satisfy most of your needs. One of the most popular jointers out there is this Steelex ST1010 jointer.
The ST1010 comes with a 1 HP, single-phase, TEFC capacitor-start induction motor, which means that the cooling fan is enclosed. This motor has more than sufficient power to deal with materials like poplar, hard maple, walnut, and pine. The cast-iron infeed and outfeed tables are very smooth and machined to near-perfect smoothness.
Once you coat the tables with a few coats of wax, you gain a very flat surface where the wood will glide across effortlessly. This unit is designed to perform various types of operations. For example, it is ideal for surface planing and preparing your material for surface planning on a thickness planer.
Edge jointing is used to produce a flat-edged, finished surface for finishing or joinery – it is also a required step when you are dealing with warped or rough stock, while bevel cutting is used for cutting a particular angle into your work piece’s edge. This jointer machine has a preset fence stop at 45 and 90 degrees.
This unit comes three (1-sided) factory installed knives on the cutterhead. These knives do not need adjustments out of the box, but you can install a new set without requiring calibration.
Your tools are only as good as how they perform, and the Steelex ST1010 Jointer does a great job every time! You can use it for both edge and face jointing with great success.
The sharp knives installed in the jointer cut through hard and softwood with ease. This unit offers users smooth, straight surfaces that are well within tolerances you would expect for fine woodworking projects.
7) JET 708457DXK JJ-6CSDX 6-Inch 1 HP Jointer
The Jet JJ6CSDX Jointer is a 6-inch unit that is fitted with an all steel base cabinet that helps to keep it stable; it also places the unit at a back-saving height of 31-1/4 inches above the flooring.
The cabinet features a large door on the rear, giving you comfortable access to the unit’s motor in case you need to change the belt. The base cabinet houses a 1 HP, single-phase 115/230V motor that is prewired at 115V. The motor offers the unit plenty of punch and spins the cutterhead at a constant 6000 Revolutions per Minute.
The JJ-6CSDX base cabinet also houses an angled dust chute running to the enclosure side from the cutterhead. The chute stops at a 4-inch diameter port that allows you to attach a standard sized dust collector hose without using adapters. This jointer features a 54-3/4-inch long by 7-3/8-inch wide cast iron table.
The table is nicely machined, and the outfeed table has a built-in ½-inch rabbeting ledge. Both the outfeed and infeed tables ride on gib sliders, which are adjustable via included gib screw adjusters should they loosen up. Front-mounted hand wheels on both the outfeed and infeed tables help in controlling their up and down movements. The infeed table is a full range ½ inch with an easy to read scale next to the hand wheel.
Requiring a special mention, the Jet JJ6CSDX Jointer has a steel cutterhead equipped with three 6-1/6-inch long by ¾-inch tall and 5/64-inch double-sided knives. Overall, this unit is well designed and brings you all the floor model capabilities at home. If you are looking for a floor model jointer to add to your shop, look at this unit. Not only will it do the job well, but it will also make your shop look even bigger!
6) Shop Fox W1829 Benchtop Jointer, 6-Inch
This Shop Fox W1829 Benchtop Jointer is a product of one of the most famous Woodstock International product lines. Supported by experience spanning over 20 years, with proven customer service and a strong dedication to high-quality tools, it is easy to see where this benchtop jointer draws its main features. In fact, the W1829 falls in the more budget-friendly range of tools that offer users power. Read on to find out more about this Shop Fox machine.
Under the hood, this benchtop houses a 1-1/2 horsepower, single-phase motor that makes it the ideal tool for your workshop or home applications. The motor powers a 2-knife cutter head that operates at a maximum speed of 10,000 Revolutions per Minute. This is the going rate for many benchtop jointers on the market.
However, the power on this unit is non-adjustable, but it will offer you a performance speed of about 20,000 cuts a minute. Use the unit’s in-feed table knob to fine-tune the cutting depth. In addition, the fence is adjustable as well and stops allow for 90 degrees and 45 degrees outward, and 45 degrees inward adjustment levels. Besides, you can achieve a bevel jointing of up to 45 degrees using the quick-adjust knife design – you do not need a knife setting jig to do this.
All the results produced by this machine will provide the user with a pleasant level of accuracy and control. Other features in this unit that you may enjoy include the inbuilt mini impeller that collects wood chips from the cutter head and blows them out through a 2-1/2-inch dust port. This unit from Shop Fox also features a sturdy cast iron construction that offers you added robustness as you work with the unit.
While the Shop Fox W1829 Benchtop Jointer is a moderately priced machine, it does offer you a few extra touches that make it better than other tools in its class. The active chip extraction has a 2-1/2-inch outlet that is designed to fit ordinary galvanized trash cans.
The fine adjustments of the infeed table – but some users have found more play in this than they would like. In addition, it is possible to set the fence to bevel anywhere from 45 to 135 degrees, but there’s no angle guide to help you.
5) Jet JJP-10BTOS 10-Inch Bench-Top Jointer/Planer
This Jet JJP-10BTOS 10-Inch Bench-Top is a jointer/planer combo. The idea behind this creation has a jointer at the top and the planer section at the bottom. A single cutter head, one motor and a single chassis controls both compartments.
If you are having space issues in your workshop, basement or garage, then this jointer planer combination unit is the perfect solution for your woodworking requirements. Combining the two functions in a single machine offers you a bigger jointer capacity because the same cutter head easily doubles up as the planer.
If you are looking to save space in your work area, go on reading about the other features on this unit.
This unit from Jet features a 13-amp motor that provides you with enough to run robust projects in your workshop, while the integrated two high-speed knives help you achieve smoother, precise cuts. The unit is made of a sturdy construction that provides decent support for the jointer tables.
The dust collection system is good as this unit features a 4-inch dust port. Considering the size of this machine, it is critical that you ensure that the motor and transmission are not exposed to debris. The sheet metal outfeed on the JJP-10BTOS is designed to tackle long work pieces and even offer you length adjustment for handling even longer pieces. The smart design helps you achieve great results every time you use the machine.
Overall, while this Jet JJP-10BTS Benchtop Jointer is far from being the best on the market, it is a decent product. The best qualities it offers users include a powerful motor, speed, and price. Some of the things that require improving are the aluminum tables and fence – it would be better to use cast iron.
This 10-inch jointer/planer combo machine is a good starting point for small planing and jointing jobs with 10-inch wide boards and that user looking for an affordable unit.
4) Cutech 40180H-CT 8″ Bench Top Spiral Cutterhead Jointer
Unless you are planning to purchase pre-surfaced stock for your entire project, there is one surfacing tool that you cannot do without – the Cutech 40180H-CT 8″ Bench Top Spiral Cutterhead Jointer. This jointer makes the work of flattening surfaces easy; you can remove twists, cups, and bows in rough sawn lumber.
The result is stock that is flat on all faces, and the adjacent faces stand at a 90-degree angle with parallel opposite faces. In short, your stock becomes uniform across the length, width, and height.
While a fully-fledged commercial woodshop requires a massive jointer, what about the small-scale woodshop enthusiast or owner? Well, the options they have included purchasing pre-surfaced lumber or rigging up an elaborate router gig to joint wood. These are just a few options, but the solution is this 40180H-CT from Cutech. The unit runs on a 115-Volt, 1-phase, 12 AMP motor that powers a 12,000 Revolutions per Minute cutter head.
The cutter head consists of 16 two-sided HSS inserts that can cut a maximum cutting depth of 1/8-inch and a maximum cutting width of 8 inches. This table is 33-1/2 inches long, and the fence is 4-3/8 inches long. In general, you can cut stock that is approximately twice the length of the bed.
The fence offers you stops that extend from 90 to 135 degrees quickly. This model from Cutech comes with a 2-year warranty, push blocks and the necessary tools you would need for replacing the cutter tips or rotating.
Overall, this unit is an affordable option that works perfect for anyone on the market for a benchtop spiral cutter head jointer. It is also perfect for people who are looking to work with 8-inch cutting width and a unit that will not take up too much space in the workshop.
This Cutech 40180H-CT Benchtop Jointer is an excellent tool from a company that is fast rising to become a major player in the woodworking industry; therefore, it is highly recommended.
3) PORTER-CABLE PC160JT Variable Speed Bench Jointer, 6-Inch
Are you a keen woodwork enthusiast? Then you must have heard about a wonderful tool called the jointer. One of the best tools on the market is the 6-inch PORTER-CABLE PC160JT Variable Speed Bench Jointer.
At a glance, it offers users variable speeds of up to 11,000 Revolutions per Minute, a two-knife built-in cutter head and an extra large table for work support. If you are interested in learning more about this bench jointer from Porter-Cable, read on.
The PC160JT is an optimal bench jointer that offers you performance that borders no other jointer in its class. It is packed with a host of features that will see you enjoy using it. It is easy to operate this model, a great advantage especially if you are new to woodworking. While using this unit, you can rest assured that each one of your projects will come out consistent and smooth thanks to the dual cutting heads and fence.
Projects you create using this jointer will display proper structure and can be finished in no time; this is partly because it is easy to replace and adjust the few elements on the machine. For example, you have the option of choosing how slow or fast you want the PC160JT to work by just changing the speed range, depending on what you are trying to achieve.
The jointer is also very durable and resilient enough to offer you several years of service. Considering its price tag, you are getting a product that virtually guarantees you perfect execution and quality every time you turn it on.
On the other hand, some users have noted that this jointer’s fence tends to drift even after securing it. Also, users have to re-square the fence whenever an adjustment is made, which can be very difficult considering how it is designed.
The tabletop is made of a low-quality aluminum material, which is not durable. Overall, this Porter-Cable PC160JT Bench Jointer comes with an excellent record when it comes to performance. It is also reasonably priced and is easily the best product for the individual who wants a high-performance, affordable benchjoint jointer in their garage.
2) Delta Power Tools 37-071 6 Inch MIDI-Bench Jointer
This Delta Power Tools 37-071 Midi-Bench Jointer comes highly recommended for its ability to use the contemporary benchtop design efficiently and packing a powerful motor that offers woodworkers 10,000 Revolutions per Minute.
The company behind this unit is famous for its reliable power tools and is proud of this high-end unit. One of the reasons the 37-071 costs more than other benchtops is because is because it is designed to offer cleaner cuts and features a sturdier build quality.
This is a heavy-duty unit, and it should be your first consideration if you are willing to splurge on a high-end product.
Unlike other benchtops, this unit is not a lightweight option as it weighs at a little over 80 lbs., which is stable enough to provide stability required while cutting larger boards due to minimal vibration or wobbling. The entire body of the unit is cast iron build that makes it a reliable tool for professionals and beginners alike.
The machine can process just about any wood you throw at it, including the hardest stock and also allowing you to join several types of stock quickly. Joining 2 x 6 boards is a piece of cake with this jointer. The unit’s stops are adjustable, ranging up to 135 degrees for processing by two large aluminum cutters. Conveniently placed at the cutting end, the cutters are capable of penetrating hardwood quickly.
Replacing the blades for your own or new replacements is a breeze. The carefully included jackscrew arrangement and special push blocks allow you to move your stock safely from one end to the next. A professional woodworker can easily dismantle and assemble the entire jointer without having to worry about spending hours on end.
One of the things that make this unit a favorite for many users is its heaviness. Users say that they do not feel like they are missing out or the wood is slippery while using the 37-071 from Delta Power. The blade adjustment is high functioning, and it takes under a minute to fully replace or adjust the blades.
Despite its heavy-duty build and feel, the Delta Power Tools 37-071 Midi-Bench Jointer is surprisingly easy to use and simplistic. All you need to do is adjust the unit’s fence, and you are ready to make whatever you want.
1) Cutech 40160H-CT 6″ Bench Top Spiral Cutterhead Jointer
The Cutech 40160H-CT 6″ Bench Top Spiral Cutterhead Jointer is another contender for the top position in the jointer list. This is because the manufacturer has packed the superior performing helical spiral cutter head into it.
Such cutter heads replace the traditional straight-knife cutter heads found on many other units. In addition, the company has implemented a complete redesign of the spiral cutter head to offer users more cutting capacity and ease of use.
Now, this unit features 12 two-sided inserts that provide you a smoother finish than you would find on other jointers. Read on to learn more of why this benchtop jointer is a favorite for many woodworking enthusiasts.
The 40160H-CT model comes with a complete dust collection area featuring a 2-1/4-inch dust port, meaning that expected tear out is reduced. Cast iron outfeed and infeed tables are incredibly sturdy and almost perfectly designed. You can easily level them on the fly and a cutter head guard tension spring helps provide you with some accurate results.
The one-piece, 4-3/8 inches high by 19-5/8 inches wide, the design of the fence is much appreciated, and it can be tilted from a 90- to 135-degree angle easily. The unit has a 6-inch width capacity and 1/8-inch maximum depth capacity.
The 30 inches table machine makes it easy to see how versatile it can be in your workshop. A great touch from the manufacturers is the fact that they have added push blocks and all the tools you would need for replacing and rotating the cutter tips – you’ll no longer have to deal with the hassles of buying extra tools.
This Cutech 40160H-CT Benchtop Jointer is an excellent tool that is worth considering. It brings you a powerful 10 Amp, 120-volt motor that makes slicing even the hardest or thickest of wood at home an easy task.
The helical cutter head also helps in making it one of the most comfortable jointers to use on the market while avoiding all the debris that could quickly clog the system.